Products from Mundorf

560.0uF 5% Mundorf ECAP RAW 63V Aluminium electrolytic capacitors are used in applications for which film capacitors are not suitable for reasons of space and/or cost. Polarized electrolytic capacitors which have the most compact design...

680.0uF 5% Mundorf ECAP RAW 63V Aluminium electrolytic capacitors are used in applications for which film capacitors are not suitable for reasons of space and/or cost. Polarized electrolytic capacitors which have the most compact design...

Mundorf AMT19CM2.1-C Airmotion Tweeter High End AMT for 3-way systems. The 2.1 type is a 4 ohm version and optimized for use with a 6dB crossover. Very low distortion Very flat impedance curve Wide spread directivity 6dB x-over...

Mundorf AMT21CM2.1-C Airmotion Tweeter High End AMT for 2-way systems. Due to the low height is the vertical dispersion high and thus the radation is similar to a dome tweeter. Very low distortion Very flat impedance curve Wide spread...

Mundorf AMT23CM1.1-R Airmotion Tweeter High End AMT for 2-way systems. With its efficiency of 90dB this AMT needs almost no level adjustment. Its high SPLmax meets the highest requirements. Very low distortion Very flat impedance curve...

Mundorf AMT23CM1.1-C Airmotion Tweeter High End AMT for 2-way systems. With its efficiency of 90dB this AMT needs almost no level adjustment. Its high SPLmax meets the highest requirements. Very low distortion Very flat impedance curve...

Mundorf AMT 25CM1.1-R High End AMT for 2-way systems. The 25CM1.1 combines a strong vertical directivity with a wide horizontal dispersion. Ideal for rooms with reverberant ceilings and floors. It is also the AMT with the lowest...

Mundorf AMT25CS2.1-R Airmotion Tweeter High End AMT for 2-way systems. The 25CS2.1 combines a strong vertical directivity with an equally strong horizontal directivity. Ideal for D'Appolito systems an modern rooms wqith reverberant...

Mundorf AMT 29CM1.1-R High End AMT for 2-way systems. The optimal synthesis between PA and the high-end HiFi. With 100dB at 8 Ohms, it is ideal for friends of single ended tube amps. Optimized 6dB filters. Very low distortion Very flat...

Mundorf AMT19CM1.1-C Airmotion Tweeter High End AMT for 2-way systems. The 1.1 version is optimized for use with a 12dB crossover, allowing a particularly low crossover frequency. Very low distortion Very flat impedance curve Wide spread...

Mundorf AMT 17D2.2 Free-standing Dipole. Useable as a super tweeter for existing speaker boxes or for combination with full range drivers. 4 ohms version. Lower cross over frequency Specifications power handling (continuous/programme) =...

Mundorf AMT 23D6.1-C This dipole is optimized for installation in a baffle. With a resonance linearization network a crossover frequency of 2 kHz is possible. The efficiency fits most mid0range drivers. Very low distortion Very flat...