Hypex

Close filters
  •  
from to
1 From 2
No results were found for the filter!
Hypex Cable set SMPS1200
Hypex Cable set SMPS1200
Hypex Cable set SMPS1200 The cableset SMPS1200 is a complete set of cables to connect the SMPS1200A400 or the SMPS1200A700 Specifications lenght: 30cm
€12.10 *
Hypex Cable set SMPS3K
Hypex Cable set SMPS3K
Hypex Cable set SMPS3K The cableset SMPS3k is a complete set of cables to connect the SMPS3k to one amplifier module. If connecting 2 or 3 amplifiers you need 2 or 3 cable sets. Specifications length: 30cm
€14.52 *
Hypex Cable set SMPS400
Hypex Cable set SMPS400
Hypex Cable set SMPS400 The cableset SMPS400 is a complete set of cables to connect the SMPS400A180 or the SMPS400A400. Specifications length: 30cm
€5.45 *
Hypex DLCP
Hypex DLCP
Hypex DLCP The “DLCP” is a complete hardware/firmware platform for digitally filtered (6 channels) and corrected active multiway loudspeakers. Digital response correction allows significant extra degrees of freedom in the acoustic design of a loudspeaker. Driver parameters can be selected for best efficiency and distortion instead of electrical damping, and the cabinet can...
€332.75 *
Hypex DLCP add-on set
Hypex DLCP add-on set
DLCP add-on set DLCP Input board The DLCP can be used as a digital pre amplifier when the optional “DLCP input board” is bought. This input board can be connected to the DLCP with only 2 flat cables. You can increase the number of analogue inputs to 4 balanced stereo analogue inputs. It has four digital inputs; USB audio, AES (XLR/RJ451), S/PDIF and Optical in. It has two...
€211.75 *
Hypex DSP to UcD signal cable
Hypex DSP to UcD signal cable
DSP to UcD signal cable 50cm balanced signal cable with 4-pin connectors on both sides to connect our DLCP to our UcD modules also providing the enable signal. Specifications The QuietConduit cable design incorporates several refinements over normal balanced cables. A conductive polymer interface layer between the braid shield and the insulation of the signal conductor...
€15.13 *
Hypex SMPS1200A180
Hypex SMPS1200A180
Hypex SMPS1200A180 Power Module The SMPS1200 Power Supply is a 1200W high efficiency switch mode power supply specially designed to be used in combination with our range of UcD™ amplifier modules. This model is made for the UcD180 modules. No cables included. Specifications APPLICATIONS: - Supply for single or multiple amplifiers of the UcD™ range - Active loudspeakers...
€217.80 *
Hypex SMPS1200A400
Hypex SMPS1200A400
Hypex SMPS1200A400 Power Module The SMPS1200 Power Supply is a 1200W high efficiency switch mode power supply specially designed to be used in combination with our range of UcD™ amplifier modules. This model is made for the UcD400 modules. No cables included. Specifications APPLICATIONS: - Supply for single or multiple amplifiers of the UcD™ range - Active loudspeakers...
€217.80 *
Hypex SMPS1200A700
Hypex SMPS1200A700
Hypex SMPS1200A700 Power Module The SMPS1200 Power Supply is a 1200W high efficiency switch mode power supply specially designed to be used in combination with our range of UcD™ amplifier modules. This model is made for the UcD700 modules. No cables included. Specifications APPLICATIONS: - Supply for single or multiple amplifiers of the UcD™ range - Active loudspeakers...
€217.80 *
Hypex SMPS3kA400
Hypex SMPS3kA400
Hypex SMPS3kA400 Power Module The SMPS3k Power Supply is a 3000W high efficiency switch mode power supply specially designed to be used in combination with our range of UcD™ amplifier modules. This model is made for the UcD400 and the UcD250LP modules. No cables included. Specifications APPLICATIONS: - Supply for single or multiple amplifiers of the UcD™ range - Active...
€290.40 *
Hypex SMPS3kA700
Hypex SMPS3kA700
Hypex SMPS3kA700 Power Module The SMPS3k Power Supply is a 3000W high efficiency switch mode power supply specially designed to be used in combination with our range of UcD™ amplifier modules. This model is made for the UcD700 and the UcD2k modules. No cables included. Specifications APPLICATIONS: - Supply for single or multiple amplifiers of the UcD™ range - Active...
€290.40 *
Hypex SMPS400A180
Hypex SMPS400A180
Hypex SMPS400A180 Power Module The SMPS400 Power Supply is a 400W high efficiency switch mode power supply specially designed to be used in combination with our range of UcD™ amplifier modules. This model is made for the UcD180 modules. Also available for the UcD400. Attention: order cableset and spacers seperate! Specifications APPLICATIONS: - Supply for single or multiple...
€108.90 *
1 From 2
Viewed