SB Acoustics SATORI MW13P-8

€173.72 *

Prices incl. VAT plus shipping costs

Delivery time 1-3 Workdays

  • 1382353
SB-Acoustics 5'' SATORI MW13P-8 Gasket and bolt hole protrusions for reduced coupling... more
Product information "SB Acoustics SATORI MW13P-8"

SB-Acoustics 5'' SATORI MW13P-8

  • Gasket and bolt hole protrusions for reduced coupling to speaker cabinet
  • High piston to chassis diameter ratio
  • Vented pole piece for reduced compression
  • Long life silver lead wires attached 180° apart for improved stability
  • CCAW voice coil for reduced moving mass
  • Extended copper sleeve on pole piece for low inductance and reduced distortion
  • Non-conducting fibre glass voice coil former for minimum damping
  • Powerful optimized low distortion neodymium motor system
  • Advanced BIMAX spider for improved linearity
  • Soft low damping rubber surround for optimum transient response
  • Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house
  • ented aerodynamic cast aluminium chassis for optimum strength and low compression

 

Specifications

  • power handling (continuous/programme) = 40 W
  • resonance frequency fs = 41.5 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6.0 Ohm
  • force factor BL = 5.7 N/A
  • voice coil inductance L = 0.15 mH
  • effective piston radiating area Sd = 70 cm2
  • effective mechanical mass incl. air load mms = 6.8 g
  • equivalent volume of compliance Vas = 15 l
  • total Q factor Qts = 0.30 (Qms=3.55, Qes=0.33)
  • voice coil diameter = 30.5 mm
  • mounting diameter d = 111 mm
  • overall diameter d = 132 mm
  • mounting depth (not countersunk) t = 63.7 mm
Related links to "SB Acoustics SATORI MW13P-8"
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "SB Acoustics SATORI MW13P-8"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Viewed